LaserCraft™ ProTape — Measure Long Walls Solo in Seconds With Pinpoint Laser Accuracy
LaserCraft™ ProTape — Measure Long Walls Solo in Seconds With Pinpoint Laser Accuracy
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Couldn't load pickup availability
LaserCraft™ ProTape — Measure Long Walls Solo in Seconds With Pinpoint Laser Accuracy
Measure Long Walls Solo Without The Tape Flopping, Sliding, Or Snapping Back At Your Face
LaserCraft™ ProTape stacks three measuring tools into one pocket-sized body — a 16-foot manganese steel tape for close work, a laser rangefinder that reaches up to 60 meters, and a cross-line laser for marking horizontal and vertical guides on the spot. One device handles every measurement on the job, from cabinet trim to a 40-foot basement, without a second pair of hands and without the math.
Stop Cutting Drywall A Quarter-Inch Short Because Your Old Tape Buckled
Steel tapes sag the moment you cross 12 feet alone. The tip slips off the wall. You squint at the fractions, you forget the number on the walk back to the saw, and the piece comes back wrong. Cheap laser-only meters fix the long-distance problem and create a new one — no backup tape for trim work, batteries that die mid-project, no level to keep the beam straight.
➤ Three Tools, One Body, One Thumb: Pull the 16-foot manganese steel tape for trim and short cuts. Fire the laser rangefinder for room-wide spans up to 60m. Drop a cross-line laser to mark a perfect horizontal or vertical guide. The MEAS button switches modes without breaking your grip or your stance.
➤ Backlit LCD That Reads In Dim Basements And Bright Sun: The display stacks your last three measurements on screen, so you can compare cuts without re-measuring. Switch units between meters, feet, and inches with one button — no apps, no conversions in your head.
➤ Built-In Bubble Level Keeps The Beam Honest: A laser tilted half a degree gives you a number that's wrong by inches over a long run. The integrated level on the body lets you eyeball horizontal at a glance — so the reading you take is the number you cut to.
Why Three Tools In One Beats Reaching For A Different Gadget On Every Cut
The case is shock-absorbing TPR over an ABS shell, the tape is manganese steel with imperial and metric markings on the same blade, and the laser sits behind a recessed lens that survives sawdust and the occasional drop off the sawhorse. The MEAS, Unit, and CLEAR/OFF buttons run down the front so your thumb finds them without looking — measure, store, recall, repeat.
Where a tape-only forces you to walk the wall and a laser-only leaves you stuck on close work, LaserCraft™ ProTape lets you take the long shot from the doorway, then pull the tape for the cabinet six inches in front of you — without setting anything down or switching gear.
Why Weekend DIYers And Working Pros Are Tossing The Standalone Laser
Renovators measuring solo, finish carpenters squaring trim, and homeowners hanging gallery walls all run into the same wall: the tool drawer keeps growing. One device that handles short, long, and cross-line in the same hand cuts trips back to the truck and trips back to Home Depot. "Bought this for one weekend basement project. Three months later it's still in my belt — I don't even know where my old tape is. — Marcus T."
Measure Once, Cut Once, Move On
✓ Solo Measurements That Stop Costing You Drywall: Fire the laser from one wall, lock the number on the screen, walk straight to the saw. No helper. No buckling tape. No re-cuts.
✓ Built For Job Sites, Not Just Living-Room DIY: Shock-absorbing TPR wraps the ABS body so a drop from belt height doesn't end the day. The recessed laser lens stays clean in sawdust.
✓ Cross-Line Laser For Hanging, Tiling, And Squaring: Project a level horizontal and vertical line on any wall and mark gallery frames, tile rows, or stud lines without a second tool.
How LaserCraft™ ProTape Works In Three Steps
Step 1: Press MEAS to wake the device. Pull out the tape for close work, or fire the laser for spans up to 60m.
Step 2: Aim at the wall, capture, and read the number off the backlit LCD. Hit the storage button to lock readings for area and volume math.
Step 3: Cut, mark, or install with the actual number on screen — and walk to the next room without re-measuring.
| LaserCraft™ ProTape | Old-School Tape | Laser-Only Device |
|---|---|---|
| Tape + laser + cross-line in one body ✅ | ❌ tape only — no long-range, no level guide | ❌ laser only — no backup tape for trim |
| Solo measurements up to 60m ✅ | ❌ tape buckles past 12 feet alone | ✅ long range, but no close-work option |
| Backlit LCD stores last 3 readings ✅ | ❌ squint at tiny marks, forget the number | ❌ single reading, no comparison on screen |
| Built-in bubble level + cross-line guide ✅ | ❌ neither | ❌ tilted beam = wrong number, no guide lines |
SPECIFICATIONS
- Body Material: ABS shell with shock-absorbing TPR coating
- Tape Blade: 16-foot (5m) manganese steel — imperial and metric scales on the same blade
- Laser Range: Up to 40m or 60m (select length variant at checkout)
- Color: Yellow or Blue (select at checkout)
- Power: 2 x 1.5V AAA batteries (not included)
- Size: 3.35in x 3.23in x 2.20in — fits in a tool belt or back pocket
- Includes: 1 x LaserCraft™ ProTape unit with wrist lanyard
Common Questions Answered
How accurate is the laser compared to a regular tape?
The laser locks a reading the moment the beam hits the wall, so there's no slack, no sag, and no parallax error from reading tiny tape marks at an angle. For close work under 16 feet, the manganese steel tape gives you the same precision you'd expect from a contractor-grade tape.
Do I need batteries for the tape side too?
No — the physical tape works without batteries. Batteries (2 x AAA, not included) only power the laser, the LCD, and the cross-line projector.
Will the laser work on dark walls or shiny surfaces?
Matte and standard interior surfaces are no problem. For glossy black or mirrored surfaces, tape a small white square at the target point — same trick the pros use with any laser distance meter.
Is it tough enough for actual job-site use?
The ABS shell is wrapped in shock-absorbing TPR and the laser lens is recessed into the body so it won't take a direct hit from sawdust or a drop off the sawhorse. It's not waterproof — keep it out of the rain.
What if it doesn't work for my project?
We back it with a 14-day no-questions-asked return window. If it doesn't earn its place in your tool belt, send it back.
Is customer support available if I need help?
Yes — our team is available around the clock for setup questions, returns, and warranty claims.
Join Over 2,300 DIYers And Pros Who Cut Once And Move On
The right tool turns a two-trip cut into a one-trip cut. Thousands have already swapped their old tape and standalone laser for one tool that does both — and a cross-line guide on top. Add yours to the cart and finish the project that's been sitting half-done in the basement.
Luvinaro Guarantees
