ProEdge™ — Hit Every Miter, Bevel & Slope Dead-On in Seconds
ProEdge™ — Hit Every Miter, Bevel & Slope Dead-On in Seconds
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Couldn't load pickup availability
ProEdge™ — Hit Every Miter, Bevel & Slope Dead-On in Seconds
Hit Every Miter, Bevel & Slope Dead-On the First Cut
Stop measuring twice, cutting once, and still ending up with a quarter-inch gap. ProEdge™ snaps onto your saw, your stud, or your tile and reads the exact angle to 0.2° — no bevel gauge slip, no phone-app guesswork.
Digital Readout. No More Squinting at Tick Marks.
Big bright digits the second the tool touches the surface. Reads in a dim basement, under your truck, or in the back corner of an attic — wherever you actually need it.
➤ Reads Angle (°) and Slope (%): One button toggles between degrees for carpentry and percent grade for roofing, ramps, or landscaping — no mental math.
➤ Magnetic to Steel & Aluminum: The laser variant grips on four sides — top, bottom, or either edge of saw blades, fences, and beams. Stays put while you read.
➤ Card-Sized Portability: 60 × 62 × 33mm. Drops in your apron pocket between your pencil and your tape.
Drop-Tested Shell That Survives the Jobsite
Reinforced rubber corners take the spills, the dust, and the 2 a.m. truck-bed slides. One press of ZERO recalibrates against your reference surface — no factory service, no sending it back.
"Used to drop my old digital level and watch it run 3° off the rest of the day. Kicked this one across the garage twice — still hits 0.0 every time." — Marcus T.
Forget the Bevel Gauge — Read, Hold, Move On
Lay it flat. Press ZERO. Read the angle. Hit HOLD. Walk it to your saw. The whole transfer takes ten seconds and you don't lose a tenth of a degree on the way.
Built to Hit 0.2° Accuracy on Everything That Cuts
✓ Auto-Calibration: Press ZERO on any surface and it becomes your new reference — perfect for matching the crooked walls, beams, and floors that already exist in your house.
✓ Lithium Battery That Outlasts the Project: 2-hour USB charge runs 45 days of normal use. Sleeps after 30 seconds, shuts down at 3 minutes — won't be dead next Saturday.
✓ Backlit LCD for Crawl-Spaces and Attics: High-contrast digits readable in the dark corners where you actually need it.
One Tool That Replaces Three
Your bevel gauge gives you a shape. Your bubble level gives you "close enough." Your phone app gives you a flat battery and a 1.5° error. ProEdge™ gives you the actual number, dead-on, every time you press it to a surface.
"Hung 14 cabinet doors last weekend. First two I cut by eye and had to redo. Then I clamped this to my saw fence and the rest were perfect first time. Saved my bacon." — Dave R.
Stop tossing trim. Stop fighting your phone in a sawdust-covered hand. Click ZERO. Read the digits. Make the cut.
| Benefit | ProEdge™ | Bevel Gauges & Phone Apps |
|---|---|---|
| Reads Exact Angle to 0.2° | ✅ | ❌ |
| 4-Sided Magnetic Grip on Steel | ✅ | ❌ |
| Laser Line for Long Transfers | ✅ | ❌ |
| Survives Jobsite Drops | ✅ | ❌ |
Specifications
- Measurement Range: 0°–360° across four 90° quadrants
- Accuracy: 0.2° on the laser variant
- Modes: Angle (degrees) and Slope (percent grade)
- Display: Backlit LCD, readable in low light
- Battery: Rechargeable lithium — 2-hour USB charge runs 45 days of normal use (cable included)
- Power Saving: Auto-sleep at 30 seconds, shutdown at 3 minutes
- Dimensions: 60 × 62 × 33mm (card-sized)
- Magnetic Base: 4-sided on the laser variant, single-sided on the no-laser variant
How It Works
Simple Setup
Power on, sit the unit on any flat reference surface, press ZERO. That's your baseline — done.
Instant Read
Press it to your workpiece. The exact angle shows up in big digits — degrees or percent grade, your call.
Magnetic Anywhere
Snaps onto saw blades, fences, beams, and rails. Hands-free reading while you adjust the cut.
Hold Mode
Press HOLD to lock the reading. Pull the tool off, walk it to your saw, and the number stays put.
Bonus Laser Option
Pick the laser variant to project a red line across the workpiece — handy for transferring an angle along a 6-foot board.
30-Day No-Cut-Wasted Guarantee
If ProEdge™ doesn't read dead-on every time you press it to a surface, send it back within 30 days for a full refund. We'd rather eat the return than have your trim end up in the bin.
Hit Every Angle the First Time, Every Time
No more guessing. No more re-cutting. No more measuring three times and getting three different numbers. Click ZERO, read the digits, make the cut — and move on with your project.
Luvinaro Guarantees
