TruBalánce™ — Stop the Washer Walk, Kill the Shake, and Save Your Floors
TruBalánce™ — Stop the Washer Walk, Kill the Shake, and Save Your Floors
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Couldn't load pickup availability
TruBalánce™ — Stop the Washer Walk, Kill the Shake, and Save Your Floors
Lock Your Washer Down and Silence the Spin Cycle for Good
If your washing machine "walks" across the floor on every spin cycle, your fix isn't another flat rubber pad — it's height. TruBalánce™ pads use a twist-up threaded post (8–11 cm range) and a dual rubber grip that bites into tile, vinyl, or hardwood. Level the machine in 60 seconds. The walk stops. The shake stops. Your downstairs neighbor stops leaving notes.
If Your Machine Sounds Like a Jet Taking Off, Your Floors Pay the Price
Most "anti-vibration" pads are just thin rubber discs. They squash flat after a month, do nothing about an uneven floor, and let your washer drift toward the door an inch every load. Towels under the corners slip. The built-in machine feet only adjust about a centimeter. Meanwhile, your tile cracks, your wood floor scratches, and the spin cycle wakes the baby.
➤ Stop the walk before the next load: Black rubber base grips tile, vinyl, hardwood, and laminate. Top rim grips the appliance foot. Even a heavy front-loader on full spin doesn't budge.
➤ Twist to level on any floor — 8 to 11 cm range: Threaded post adjusts a full 3 cm by hand. No tools, no shims, no rolled-up cardboard under one corner.
➤ Built for wet laundry-room reality: Molded PP/PVC body shrugs off detergent splashes, hose drips, and steam. Won't rust, swell, or crumble like the cheap stuff.
Built for the Wet, Soapy, Hot-and-Cold Reality of a Real Laundry Room
Laundry rooms aren't kind. Hose drips puddle around the base. Hot water vents warm steam under the machine. Detergent spills, lint, and the occasional overflow soak everything below the drum. Rubber pads warp. Foam pads get gummy. Cheap plastic feet split.
TruBalánce™ pads are molded from solid PP/PVC with a sealed-base rubber grip. They sit in standing water without rusting, warping, or losing their hold. Install them once and forget they're there for years — even if your hose springs a leak between loads.
Why Apartment Renters Won't Run a Load Without Them
Thin walls, tile bathrooms, neighbors below — apartment laundry is brutal. The renters who switched to TruBalánce™ pads describe the same moment: they ran a full spin cycle, then walked in expecting chaos and found the machine sitting exactly where they left it. No bang. No drift. No note from downstairs.
"Honestly skeptical because they look cheap. Put them under my LG front-loader on tile and the thing has not moved a millimeter in three months. The walk is gone, the noise dropped by half, and my downstairs neighbor stopped messaging me. Wish I'd bought these the day I moved in." — Maya R.
Get a Steady, Quiet Laundry Room You Stop Noticing
✓ Cut spin-cycle thump and rumble: Dual rubber surfaces absorb the vibration before it travels into the floor and the walls.
✓ Add years to your appliance: A level, locked-down machine works less hard. The drum bearings, suspension, and hoses last longer when nothing's lurching mid-cycle.
✓ Use them on more than the washer: Same pads work under fridges, freezers, dryers, and even sofa legs that creep on hardwood. One set, a dozen jobs.
From Walking Washer to Rock Solid in Three Twists
Step 1: Tip the appliance back, slide one pad under each foot, and lower the machine onto the rubber tops.
Step 2: Twist the threaded post on each pad up or down by hand until the machine sits dead level (anywhere from 8 cm to 11 cm).
Step 3: Run a full spin cycle. The rubber grip locks in under load — the machine doesn't move and the floor stays quiet.
| TruBalánce™ Appliance Pads | Flat Rubber Pads | Built-In Machine Feet Only |
|---|---|---|
| Twist-adjustable 8–11 cm to level any floor | ❌ | ❌ |
| Dual rubber grip — top and base both lock | ❌ | ❌ |
| Sealed PP/PVC body — won't rust, warp, or crumble | ❌ | ❌ |
The Numbers for Your Inner Engineer
- Set: 4 pads (one per appliance foot)
- Diameter: 6.8 cm / 2.67 in
- Height range: 8 cm – 11 cm / 3.15 in – 4.33 in (twist to adjust)
- Material: PP/PVC body with rubber top rim and rubber anti-slip base
- Compatibility: Front-loaders, top-loaders, dryers, fridges, freezers, sofas
Answers Before You Add to Cart
Will these fit my specific washing machine?
The 6.8 cm rubber top rim is sized for standard front-loader and top-loader feet — including LG, Samsung, Whirlpool, GE, Bosch, and most European stackable units. The pad sits under the existing foot, so there's nothing to screw or attach.
Can they hold a heavy front-loader?
Yes. The threaded post is solid molded PP/PVC, not hollow plastic. A standard 4-pad set distributes a typical 70–90 kg / 150–200 lb washer with room to spare, and the rubber base bites tighter under load — not less.
How does the height adjustment work?
Twist the upper section by hand. The internal thread raises or lowers the post anywhere from 8 cm to 11 cm. No tools, no parts to lose. Works on uneven tile, wonky vinyl, and old wood floors that built-in machine feet can't compensate for.
Are they safe in a wet laundry room?
Yes. The PP/PVC body is non-absorbent and the rubber base is sealed, so detergent splashes, hose drips, and standing water won't rust them, swell them, or break the grip.
Can I move them later or take them when I move?
Anytime. Nothing is glued, screwed, or drilled. Tip the machine back, pull the pads out, and use them on the next appliance — or pack them in the moving box.
Stable for Years or Your Money Back
Install your TruBalánce™ pads, run a full spin cycle, and feel the difference. If the walk doesn't stop, the shake doesn't drop, and the machine doesn't sit rock solid on your floor — send them back and we'll refund every cent. No restocking fees, no quiz.
Luvinaro Guarantees
